FCC ID:A4C91006A Support www.randmcnally.
Contents What’s in the box ................................................................................................................................................................... 2 Streaming Music ...............................................................................................................................................13 ClearDryve Parts ..........................................................................................................................................
What’s in the Box In-box contents includes: • ClearDryve® 180 headphones • Audio cable • Charging cable • Hard-sided carrying case • Detachable earpiece (comes pre-assembled to the headphones) • Detachable headpad ClearDryve® Parts Microphone Head Band Earpiece Release Flexible Mic Boom Arm Note: The earpiece release button is located on the inside of the headband. The detachable headpad (shown separately), is pre-assembled on the ClearDryve® 180.
Function Button Layout The mic boom arm, ports, LEDs, and function buttons on the ClearDryve® headphones are on the same earpiece. You can use this earpiece on either ear. ClearDryve® automatically adjusts for either side when you extend the mic arm. To switch the earpiece with controls from one ear to the other, swivel the mic boom up and over to the other side. 1. Vol + button 1 2. Vol – button 3. Micro-USB port 2 4. 3.5mm audio input 3 5. Multi-function button (MFB) 4 7 6. ANC button 7.
Getting Started with ClearDryve® Power ClearDryve® On and Off To get started using ClearDryve®, first you need to charge the battery. After you power it on, then you can pair ClearDryve® to your Bluetooth® - enabled phone, tablet or laptop. Once ClearDryve® is paired, you can immediately start taking and managing calls or listening to music. To turn ClearDryve® on and off: 1. To power ClearDryve® on, press the MFB. 2. You will hear “Power on.
Once a device is paired, the LED stays solid blue. ClearDryve® will reconnect automatically when Bluetooth® is enabled and the device is within range. To pair ClearDryve® with a BT device: 1. Power on ClearDryve®. 2. 3. 4. Enable Bluetooth® on your device. ClearDryve® will display on your device as ClearDryve®. Select it. The LED will change to solid blue. You can pair ClearDryve to a new device at any time by entering pairing mode again.
Answer an Incoming Call End a Call Redial the Last Number To answer an incoming call: To end a call: To redial the last connected number: 1. Press the MFB. 1. Press the MFB to hang up. 1. Quickly press the MFB twice. 2. ClearDryve will beep once to confirm. The call will be live immediately. 2. ClearDryve will beep once to confirm. 2. ClearDryve® will beep once to confirm.
Turn the Volume Up and Down Streaming Music At any time, you can press the volume buttons to turn the volume of the call up or down. There are 16 different volume levels available. Quick Access To change the volume: 1. Press Vol + to increase the volume. 2. Press Vol – to decrease the volume. 3. ClearDryve® will beep when you reach the lowest or highest volume settings. Note: Depending on your device, the volume buttons may behave differently.
Turn the Volume Up and Down Go to the Next/Previous Song Connect to a Wired Device At any time, you can press the volume buttons to turn the volume of ClearDryve® up or down. To switch to a different song: You can connect ClearDryve® to any standard 3.5mm audio aux jack. There are 16 different volume settings available. To change the volume: 1. Press Vol + to increase the volume. 2. Press Vol – to decrease the volume. 3. ClearDryve® will beep when you reach the lowest or the highest volume. 1.
More Functions Active Noise Cancellation EQ preset The ClearDryve signal processing removes more than 90% of noise reaching the microphone so those on the other end of the call hear you — not the background. This digital noise suppression is always active. In addition, your ClearDryve® features Active Noise Cancellation (ANC), which eliminates the need to “crank up the volume” by canceling out ambient noise reaching your ear. The result is a crystal-clear listening experience for you as well.
Add/Remove the Detachable Stereo Earpiece You may need to restore ClearDryve® back to its factory state, typically when switching over to newer model smartphones / laptops for daily use. Clearing the “pairing history” on your headphones can help improve connection times between your headphones and new devices. ➡ ClearDryve® can convert from mono (one earpiece plus headpad) to stereo (two earpieces). The detachable earpiece can be replaced with the headpad for mono configuration.
Troubleshooting & FAQ Issue: Possible Causes: My headphones need to be charged very frequently. ANC may be turned ON, even when you are not using the headphones. Be sure to turn off ANC when the product is not in use, to maximize how long your headphone can be used between charges. Can I connect more than one device to my headphones. Yes, your headphones can be simultaneously connected to more than one device.
Warnings, End-User License Agreement, and Warranty WARNING: Safe Driving Practices Never attend to or handle the headphones while driving. Always use your best judgment and exercise common sense when the vehicle is in motion and do not allow yourself to be distracted by the headphones while driving. Pull over in a safe and legal manner before attempting to attend to or handle the headphones.
