Quick Start Guide

Reset to Factory Settings

You may need to restore ClearDryve

back to its factory state, typically when switching over to newer

model smartphones / laptops for daily use. Clearing the “pairing history” on your headphones can help

improve connection times between your headphones and new devices.

To reset ClearDryve

1. Make sure ClearDryve

is powered off. Now press and hold MFB to place

it in pairing mode.

2. Press and hold Vol - and MFB at the same time until you hear 2 beeps.

Your ClearDryve’s pairing history is now cleared and it is in pairing mode. You can turn off the

headphones or proceed to pair it with your device(s).

Note: The next time you turn on the device, it will automatically be in pairing mode.

Add/Remove the Detachable

Stereo Earpiece

ClearDryve

can convert from mono

(one earpiece plus headpad) to stereo

(two earpieces). The detachable earpiece

can be replaced with the headpad for

mono conﬁguration.

To remove the earpiece or the headpad:

1. Hold the black earpiece

release tab.

2. Slide the earpiece off.

To attach the earpiece or the headpad:

3. Slide the earpiece/headpad onto

the ClearDryve

head band.

4. The earpiece will click when

connected.

➡