User`s guide

Rand McNally GPS Navigator User’s Guide | CUSTOMIZING SETTINGS 17Help [phone]
Brightness
Tap day or night to change brightness (1-8) of the display for each
of those modes.
1 is optimized for night driving, 8 is optimized for day driving.
Navigation Display
You can modify the following displays on the map by tapping the
green boxes corresponding to each section:
ü Map view – Select the default map to be either 2D or 3D.
ü 3D Autozoom – Select the default for navigation with 3D view:
Autozoom or No Autozoom
With Autozoom, the system changes the scale of the map
depending on your current speed. Drive slowly, the scale
becomes large. Drive fast, the scale becomes small.
ü 2D Autozoom – Select the default for navigation with 2D view:
Low to High Autozoom options, or No Autozoom.
The Autozoom feature allows the system to automatically
zoom in / out the map as you change speed. If you choose
the Low Autozoom option, the system will zoom in / out
more slowly than with the High Autozoom option.
ü 2D View – Select the orientation default for navigating with
2D view:
North Oriented or In Driving Direction.
When selecting North Oriented, the GPS Navigator will always
show a map with North facing up and the routing arrows
will change orientation as you drive and turn. When selecting
In Driving Direction, the map will rotate so that the direction
you are facing will always be facing up on the map display.
Routing Options
ü Vehicle Profile – This entry will allow you to select either ve-
hicle routing or pedestrian/bicycle routing.
Pedestrian and bicycle mode will remove
constraints of one-way streets and pedes-
trian-only areas that normally restrict route
calculations for cars.
ü Route preference – Choose the Fastest or Shortest route
to take.
ü Interstates, Ferries, and Tollways – Separately choose
options for each to:
Allow, Avoid, or Never use
this type of street during
routing.
Brightness screen
Navigation Display screen
Routing Options screen