User's Manual

ManualsBrandsRand McNally ManualsGPSRand McNally TND 520 LM

2Rand McNally IntelliRoute

TND

™

User Manual

What’s Included

• Rand McNally IntelliRoute

TND

™

• Windshield mount with suction cup

• Quick Start Guide

• Vehicle charger

• USB cable

• Wall charger (720 only)

Charge the Battery

It is recommended that the device is always

connected to a power source during use.

Note: The vehicle may need to be on for the device to charge.

1. Your Device

Install the Mount

Note: Follow all local regulations governing the placement of the mount.

1. Select an area with a line of sight to the sky and GPS satellites.

2. Clean and dry the mounting area.

3. Remove the suction cup protective ﬁ lm.

4. Adjust the angle of the mount using the thumbscrews.

5. Pull the suction cup lever up to release suction.

6. Plug the power cord into the device and the vehicle’s 12-volt

power source.

7. Slide the device onto the mount.

8. Place and hold the mount suction cup against the

mounting surface.

9. Press the suction cup lever down until it snaps into place.

10. Adjust the device so that it can be easily seen and does not

block the driver’s line of sight.

Thumbscrews

Press down

to hold

Slide up

to mount