Owner manual

Aerobell Copes - Introduction
FEATURES
• Aerobell quick change turbine motor.
• Retaining nut for fast replacement of the rotary
atomizer assembly.
• Center mounting of rotary atomizer.
• Indirect (external) charge for use with grounded,
waterborne systems.
• Optional direct charge for use with isolated,
waterborne systems (electrodes removed).
• Optional direct charge for use with grounded,
solventborne systems (electrodes removed).
GENERAL DESCRIPTION
Aerobell Copes is a indirect (external) charging
electrostatic applicator for use with grounded
waterborne fluid systems. Indirect charging,
known as ion bombardment, is a proven method
of electrostatically charging waterborne material
without the need of isolating the uid system.
High voltage is applied to the six probes (electrode)
assemblies located on the exterior of the bell assembly.
Paint is atomized by the ground-ed bell cup and the
electrostatic charge is applied to the atomized paint
particles during the transfer to a grounded work
piece via the electrostatic eld generated from the
six probes.
INTRODUCTION
Turbine Speed: 10,000-50,000 rpm
60,000 rpm max.
intermittent
Turbine Type: Impulse
Weight: 14.2 lbs.
Length: 14 in.
Diameter: 7-7/8 in. @ Electrode
Center
Turbine Air: 45 psi max. 18 scfm
Bearing Air: 60 psi min. / 100 psi max.
2-3 scfm@80 psi
Shaping Air: 60 psi max.
Brake Air: 100 psi max.
Fluid Delivery: 400 cc/min. max.
Atomization Pattern: 15 in. - 48 in.
Rotary Atomizer
Change Time: Approx. 40 sec.
Bell Change Time: Approx. 40 sec.
Bell Cleaning Time: Approx. 2-3 sec.
(Solvent Flush)
Rotational Speed
Control Emitter
Type: Magnetic
Mechanical
SPECIFICATIONS
Power Supply Type: RansPak 1000
Charging Method: Indirect, Grounded Fluid
Output Voltage: Voltage Regulation Mode
Set Point (70 kV) max.
Output Current: Current Regulation Mode
Set Points (0-300) µA
Turbine Speed
Control: Eurocard Atomizer
Module
Shaping Air Control: Eurocard Analog Module
Electrical
6
LN-9230-00.1