Owner manual
Aerobell Copes - Parts Identication
25
1 75826-00 Manifold, Rear 1
2 LSOR0007-07 (*) O-Ring, 5.237 I.D. x 5.443 O.D. 1
3 75828-40 (*) Screw, Fillister Head, M5 x .8-6g x 40 Long 24
4 75854-02 Body Assembly, 90° Connector, Electrode 5
4g LSOR0007-05 (**) O-Ring, .551 I.D. x .691 O.D. (Included in 75854-02) 1
5 75847-00 Nut, Retaining, Electrode Body 6
6 76719-00 (*) Body Assembly, Electrode, Spherical R. Tip 6
6e LSOR0007-05 (**) O-Ring, .551 I.D. x .691 O.D. (Included in 76719-00) 1
7 13521-03 Nut, Compression, 3/8 Tube 1
8 ------------------------------- -------------------------------------------------------------------------------- ---
9 LSOR0007-06 (*) O-Ring, .989 I.D. x 1.129 O.D. 1
10 ------------------------------- -------------------------------------------------------------------------------- ---
11 ------------------------------- -------------------------------------------------------------------------------- ---
12 75841-00 Tube, Support, High Voltage Cable 1
13 76562-00 Screw Assembly, Contact Pin, Spring Loaded 1
14 14061-02 (*) Insert, Foam, Conductive 1
15 75854-01 Body Assembly, 90° Connector, Electrode 1
15e LSOR0007-05 (**) O-Ring, .551 I.D. x .691 O.D. (Included in 75854-01) 1
16 A (*) (See Page 27, Aerobell Assembly, Quick Change 1
"Part Variations") (See Exploded View - Figure 11b)
17 75844-00 Nut, Retaining, Aerobell Assembly 1
18 LSOR0005-03 (*) O-Ring, FEP Encapsulated, 2-049 1
19 75845-02 (*) Fitting, Special, .314 I.D. 1
20 SSG-8146 (*) O-Ring, Coated 1
21 LSFI0025-27 Connector, Male Tube, 1/2 O.D. x 3/8 NPT 1
22 75853-00 Tube Assembly, Ground Cable Support 1
22i 13521-03 (**) Nut, Compression, 3/8 Tube (Included in 75853-00) 1
23 75845-01 (*) Fitting, Special, .190 I.D. 2
24 SSG-8145 (*) O-Ring, Coated 2
25 LSFI0025-21 Connector, Male Tube, 3/8 O.D. x 1/4 NPT 2
26 LSFI0022-04 Union, 37" Flared Tube (AN Size) 1
27 LSOR0007-04 (*) O-Ring, .489 I.D. x .629 O.D. 1
28 75856-00 Transmitter, Fiber Optic 1
29 LSFI0025-13 Connector, Male Tube, 1/4 O.D. x 1/4 NPT 1
30 75852-00 (∆) Tool, Retaining Nut (Not Shown) ---
31 RPM-419 (∆) Wrench (Not Shown) ---
32 76060-00 Fitting Assembly, Bearing Air Interlock (Not Shown) 1
33 75845-03 Fitting, Special, .252 I.D. 1
34 76745-01 O-Ring, Coated 1
35 76739-00 Insulator, Foam (Not Shown) 4
36 76738-00 Cover, Disposable (Not Shown) 8
Item #
QUICK CHANGE MANIFOLD ASSEMBLY - PARTS LIST (Figure 11a)
Part # Description
Qty
∆ Two (or more) wrenches required per Aero-
bell Copes application zone and must be
ordered separately.
∆ One (or more) retaining nut tool required
per Aerobell Copes application zone and
must be ordered separately.
* Parts shown should be kept on hand as spare
parts for service convenience.
** The parts shown are included with the subas-
sembly or may be ordered separately as spare
parts for service convenience.
LN-9230-00.1