Owner manual
Example: 76746 X XX
Basic Part Number Table BB Bell Cup Type
Table A Fluid Tube Type
Aerobell Copes - Parts Identication
27
TABLE "A"
1
2
3
RPM-441
RPM-440
RPM-439
Dash
No.
Z
Description
Tube, Fluid Feed, 1/16 I.D.
Tube, Fluid Feed, 3/32 I.D.
Tube, Fluid Feed, 1/8 I.D.
16a Z Tube, Feed, Fluid 1
16b SSG-8128 (*) O-Ring, .239 I.D. x .379 O.D. 1
16c SSF-3137 Screw, Soc. Hd. Cap, M3 x .5-6g x 8mm Long 4
16d Y Motor Assembly, Turbine 1
16e RPM-3 (*) Shroud 1
16f X Bell Cup Assembly, Atomizer 1
16g W Ring, Shaping Air 1
16h V Cap, Shaping Air 1
16i 76748-12F (*) Screw, Fillister Hd., #10-32 UNF x 3/8 Long 3
Item #
QUICK CHANGE MOTOR ASSEMBLY PARTS LIST
(Figure 11b)
Part #
Qty
Description
* Parts shown should be kept on hand as spare parts for service convenience.
AEROBELL MODEL IDENTIFICATION
Three digits, as indicated by the tables, A through BB must follow the
basic part number 76746. The rst digit indicates uid tube type as
shown in Table "A". The second two digits indicate bell cup type as
shown in Table "BB".
02
03
Dash
No.
TABLE "BB"
76747-01
76747-02
Y
Description
Turbine Assy., 30 & 57mm
Turbine Assy., 70mm
RPM-457
LRPM4001-00
X Description
Bell Cup Assy., 57mm
Bell Cup Assy., 70mm
76756-00
76631-00
W Description
Ring, Shaping Air, 57mm
Ring, Shaping Air, 70mm
76757-00
76632-00
V Description
Cap, Shaping Air, 57mm
Cap, Shaping Air, 70mm
LN-9230-00.1