Network Router User Manual

CHAPTER 2: INSTALLATION 15
Figure 9 Change Password Window
1. Type your current password in the Old Password field.
2. Type the new password in the New Password field.
3. Retype the password in the Confirm New Password field.
4. When finished, click OK.
Connecting to Dominion KX Remotely Using Raritan
Multi-Platform Client and Raritan Remote Client
Raritan Multi-Platform Client (MPC) and Raritan Remote Client (RRC) are graphical interfaces
that allow you to remotely access the target devices connected to Raritan’s Dominion and IP-
Reach units. Both can be installed to use stand-alone or accessed remotely.
After installing the Dominion device, either download a standalone version of Raritan MPC or
RRC and establish an initial network connection, or launch either application using the directions
that follow.
Non-Windows users must use MPC, and Windows users running Internet Explorer default to
RRC.
Note: Please see the Raritan Multi-Platform Client and Raritan Remote Client User Guide,
available on Raritan’s Website http://www.raritan.com/support/sup_prdmanuals.aspx, or on the
Raritan User Manuals & Quick Setup Guides CD ROM included with your Dominion shipment
for additional information on installing and operating MPC and RRC.
MPC Requirements
To run the Raritan Multi-Platform Client and Raritan Remote Client, your computer must meet
the following minimum requirements:
• CPU speed of 1.0 GHz
• 512 Mbytes of RAM
All installations of MPC require Sun Microsystems’ Java Runtime Environment (JRE) version
JRE 1.4.2_05
or greater. You may need some configuration depending on your OS and browser;
configuration instructions are provided with the JRE download. Please note that modem use is not
supported with Raritan’s Dominion KX101.
Determine your version of the JRE on the Java webpage:
http://www.java.com/en/download/help/testvm.xml
Note: Raritan does not support JRE version 1.5.0_02 for use with MPC.
Supported Browsers
MPC supports the following browsers:
• Internet Explorer 6 or later