Network Router User Manual

CHAPTER 3: ADMINISTRATIVE FUNCTIONS 51
Configuration Backup and Restore
On the File menu, click Backup, and then click User-Group Information to download User
Group information. On the File menu, click Backup, and then click Device Configuration to
download the complete device configuration to your local computer.
To restore User-Group information saved on your local computer, on the File menu, click
Restore, and then click User-Group Information. To restore a Device configuration saved on
your local computer, on the File menu, click Restore, and then click Device Configuration.
Performance Settings
Use this window to set up the device’s video data transfer and bandwidth parameters.
1. On the Setup menu, click Configuration, and then click Performance. The Performance
Settings window appears.
Figure 37 Performance Settings Window
− Pause video stream for idle users: Click on the drop-down arrow to pause the flow of
video data during periods of prolonged inactivity to prevent inactive users from
needlessly consuming bandwidth. Options: Never / 5 / 15 / 30 / 60 / 120 minutes. Please
note: if Pause Video Stream is enabled and the keyboard or mouse do not respond on the
channel after the timeout, disconnect and reconnect to the channel to resume operation.
− Total bandwidth usage: Click on the drop-down arrow to set a maximum amount of
bandwidth that can be consumed by this Dominion KX unit (global). The lower the
bandwidth allowed, the slower the performance that may result. Options: No Limit /
10Mbps / 5Mbps / 2Mbps / 1Mbps / 512Kbps / 256Kbps / 128Kbps.
− Bandwidth per user: Click on the drop-down arrow to set a maximum amount of
bandwidth that can be consumed by each user logged onto this Dominion KX unit.
Options: No Limit / 10Mbps / 5Mbps / 2Mbps / 1Mbps / 512Kbps / 256Kbps / 128Kbps.
2. Click OK to set Performance Settings or click Cancel to close the window.