Owners manual

SETUP ALARM - Alarms Chapter

In each case press the button quickly to edit, press the or

to change values and press the button quickly to save the

entered value. In the case of On/Off selection the button will toggle

the setting On and Off. Default values are indicated in bold.

S11 Shallow Water Alarm

Sets the Shallow Depth at which the display will alarm.

The options are: OFF and 0.0 to 25 feet (0.0 to 7.6 metres)

(0.0 to 4.1 fathoms).

Values are displayed in the previously selected units (see

page 21 -s7 to select units) and are all subject to any keel or

waterline offset added (see page 24 -s21 to set an offset).

This alarm sounds as the depth passes below the set value and NOT as

the depth increases past this value.

S12 Deep Water Alarm

Sets the Deep Depth at which the display will alarm.

The options are OFF and 0.0 to 250 feet.(0.0 to 76.2 metres

(0.0 to 41.6 fathoms).

Values are displayed in the selected units (see page 21 -s7)

and are all subject to any keel or waterline offset added (see

page 24 -S21 to set an offset).

This alarm sounds as the depth increases past this value or decreases

past this value.

S13 Off Course Alarm

Sounds if the vessel turns further than the set angle away

from a "Locked" heading (see page 17 -p33).

Off/<value in degrees>

S14 High Wind alarm

Sets the Wind Speed at which the display will alarm.

The options are: OFF and 0.0 to 100 knots (0.0 to 51.4 m/s).

Values are displayed in the previously selected units (see

page 21 -s8 to select units).

This alarm sounds as the wind speed increases past the set

value and NOT as it decreases past this value.

mn100 Dual Digital Display