Owners manual

SETUP CMPAS - Compass Chapter

S26 Heading Response

Sets the update period of the Compass display.

Auto/Slow/Medium/Fast

S27 Heading Format

Tells the system to show heading information in either

Magnetic or True format.

S28 Compass Heading

Aligns the displayed heading with the Actual Magnetic

Heading of the boat.

See page 32 for the calibration process.

S29 Magnetic Variation

Allows manual entry of local magnetic variation. This setting is

ignored if variation information is available from a GPS

source.

S30 Magnetic Deviation

However carefully positioned the Compass Transducer is,

there is always the likelihood of errors being introduced by the

vessel and equipment. To remove errors it is necessary to

"Swing" the compass by turning the boat slowly until the

system can optimize the readings. Once the correction has

been completed the deviation correction value will be displayed.

See page 32 for the calibration process.

Set-up and Calibration