Owners manual

4 Seatrial and Calibration

Once the Micronet display system has been installed on the vessel and

Auto Networking has been completed it is necessary to carry out

Calibration.

IItt iiss nnoott ssaaffee ttoo uussee tthhee iinnssttrruummeennttss ffoorr nnaavviiggaattiioonnaall ppuurrppoosseess uunnttiill

CCaalliibbrraattiioonn hhaass bbeeeenn ccaarrrriieedd oouutt ccoorrrreeccttllyy..

4.1 Depth Offset

The default depth offset is -3.5 feet (a keel offset of 3.5 feet). By setting

a +ve or - ve offset the display can show the depth below the waterline

or below the keel respectively.

Press and hold the button for 2 seconds to enter Setup

Press the button repeatedly to scroll to the SETUP DEPTH

Chapter

Press the button to advance to the Keel/Waterline Offset page

Press the button to enter Edit Mode

Press the and buttons to change the value

Press the button to exit Edit Mode

Press and hold the button to exit Setup and return to

normal operation.

Seatrial and Calibration