Owners manual

4.3 Wind Calibration

Both Wind Speed and Direction can be calibrated to ensure that

readings from the Wind Transmitter are displayed accurately.

Wind Angle Offset

Motor the vessel directly into the wind.

Press and hold the button for 2 seconds to enter Setup

Press the button repeatedly to scroll to the SETUP WIND chapter

Press the button to advance to the Wind Angle page

Press the button to enter Edit Mode

Press the and buttons to change the displayed

value to 000.

The bottom digits will indicate the number of degrees of

offset entered.

Press the button to exit Edit Mode

Press and hold the button to exit Setup and return to normal

operation.

Wind Speed Correction

Wind Speed reading is factory calibrated to display correctly and

should not be altered unless external factors are thought to be

causing incorrect readings. Correction should only be carried out

if a known correct Wind Speed is available.

Press and hold the button for 2 seconds to enter Setup

Press the button repeatedly to scroll to the SETUP WIND chapter

Press the button to advance to the Wind Speed page

Press the button to enter Edit Mode

Press the and buttons to change the displayed

value to the required percentage.

The bottom digits will indicate the displayed wind speed.

Press the button to exit Edit Mode

Press and hold the button to exit Setup and return to normal

operation.

Setrial and Calibration