Owners manual

5 Installation

5.1 Tools list and Parts

Tools Required 2.5mm or 5mm Drill Bit (7mm if power connection required)

Power Drill

Cross Head Screwdriver

Parts List Mounting Template

Display Backplate and 2x Clip Brackets

Mounting Screws (3)

Mounting Bolts (3)

M4 Studs & Thumbnuts (3)

Sealing Gaskets (4)

Double Sided Tape

5.2 Precautions and Positioning Advice

Ensure mounting surface is flat.

Leave space between displays for sun covers.

Leave space to remove display from bracket (if used).

Avoid areas where damage may occur (winch handles, feet, warps etc.)

Select a flat, smooth, surface for mounting and use the template

provided to select a suitable position for mounting your Micronet display.

Check for clarity of vision and ease of access to the control buttons, it is

recommended that displays are positioned such that your arm does

NOT pass through the spokes of the steering wheel when operating the

buttons.

CCoonnttrraasstt iiss lliimmiitteedd aatt nniigghhtt wwhheenn aa ddiissppllaayy iiss vviieewweedd ffrroomm bbeenneeaatthh..

AAvvooiidd mmoouunnttiinngg ddiissppllaayyss iinn aa ppoossiittiioonn wwhheerree yyoouu wwiillll llooookk uuppwwaarrddss

ttoo vviieeww tthheemm..

Set-up and Calibration