Owners manual

Alarm Continuous bursts of three beeps will indicate an alarm. The

alarm activated will be indicated on the digital display,

accompanied by the flashing symbol. Pressing any button will

silence the alarm. See fault finding section on p37.

Depth Shallow Alarm

The water depth has fallen below the preset alarm level.

The depth value that triggers the alarm is affected by any

keel or waterline offsets that have been added.

See page 22 s11 to set the alarm function.

This alarm does not sound as the depth increases above the

preset alarm level.

Depth Deep Alarm

The water depth has increased above or fallen below the

preset alarm level.

The depth value that triggers the alarm is affected by any

keel or waterline offsets that have been added.

See page 22 s12 to set the alarm function.

Off Course Alarm

The heading has deviated from its locked value by more than

the preset alarm level

See page 22 -S13 to set the alarm function

See page 17 -P33 to lock a heading

Wind High Alarm

The wind speed has increased beyond the preset alarm

level.

See page 22 s14 to set the alarm function.

This alarm does not sound as the wind speed decreases

below the preset alarm level.

Cross Track Error Large Alarm

A large cross track error has been alerted by the GPS.

See page 23 s15 to set the alarm function.

Waypoint Arrival Alarm

A waypoint arrival signal has been received from the GPS.

The waypoint name is shown on the top line of the display.

See page 23 s16 to set the alarm function

Operation