Owner's Handbook

24 Pathfinder Radar Scanners
5. Referring to the following illustration, remove the securing nut
(1) from the watertight gland and grommet (2), where the inter-
unit cable (3) will enter the base.
1 Securing nut 2 Gland 3 Inter-unit cable 4 Eight-way plug 5 Eight-way socket 6 Power cores (2 or 4)
7 Terminal clamp 8 Screwdriver 9 Cable clamp 10 Cable clamp screws 11 Ferrite clamp
6. Slide the gland nut onto the inter-unit cable (3), and insert the
cable, still covered by its protective sleeve, through the gland into
the base.
7. Cut and remove the protective sleeve to expose the 8-way plug (4)
and power cores (6).
8. If the scanner is connected to an HSB/
hsb
2
Series Pathfinder
Radar display, fit the ferrite clamp (11) supplied, as follows:
D3230-4
10
4
5
9
White wire
6
3
1
2
11
7
8
81154_6.book Page 24 Wednesday, October 10, 2001 10:48 AM