56K Modem Module Installation and Operating Manual

Installation and Operating Manual Y-308 Modem Module

Contents

Introduction.............................................................1

Important Safety Instructions...................................1

Installation and Set-Up ............................................2

Limited Warranty....................................................4

Introduction

The Raypak Y-308 modem module provides

a method to communicate with the Y-200

controller and auxiliary equipment.

IMPORTANT SAFETY

INSTRUCTIONS

IMPORTANT NOTICE: These instructions are

intended for use by qualified personnel who are spe-

cifically trained and experienced in the installation of

this type of equipment and related system compo-

nents. Installation and service personnel may be re-

quired by some states to be licensed. If your state

requires certification, be sure your contractor bears

the appropriate license. Only qualified persons shall

attempt to repair this equipment. Repair must be ac-

cording to these instructions.

WARNING: Improper installation, adjustment, al-

teration, service or maintenance may damage the

equipment, create a hazard resulting in asphyxiation,

explosion, fire, electric shock, personal injury or

property damage, and will void the warranty.

CAUTION: THIS APPLIANCE HAS PROVI-

SIONS TO BE CONNECTED TO MORE THAN

ONE (1) SUPPLY SOURCE. TO REDUCE THE

RISK OF ELECTRIC SHOCK, DISCONNECT ALL

SUCH CONNECTIONS BEFORE SERVICING.

CAUTION: RISK OF ELECTRIC SHOCK. MORE

THAN ONE (1) DISCONNECT SWITCH MAY BE

REQUIRED TO DE-ENERGIZE THE EQUIP-

MENT BEFORE SERVICING.

Communication speed is 56k.