Manual

SETTING: BEAM QUALITY

The MAM sensor is ready to measure dose and HVL for all beam qualities without any settings. However, to

get a kVp reading you have to select a beam quality.

If your beam quality is not in the list, you have to change your anode/filter combination to one of the listed.

Expose, and you will get a kVp reading which is applicable to all anode/filter combinations for the

mammography machine (since the high voltage generator will behave identically regardless of selected

anode/filter combination).

Note! This setting will only affect the kVp measurement.

RaySafe X2 User Manual