User Manual

ManualsBrandsRaytec ManualsAccessories for electricalUBF16

Installation Steps

1. Feed cable through bracket solution

2. Mount Illuminator

3. Mount PSU

4. Connect Illuminator to PSU

5. Connect Photocell to PSU

Set Up Steps

1. Locate unit(s) as advised in

lighting design

2. Position unit to provide illumination

down onto a scene

3. If using UBA48 or UBA32 model,

adjust the horizontal angle via

Adaptive illumination™

4. Tighten all ﬁxings

Package Contents

1. Illuminator

2. Power Supply (PSU)

3. Illuminator cable (5m)

4. Photocell cable (5m)

illuminators installation guide

LUX URBAN

RAYLUX URBAN illuminators

PSU

Overview

This installation guide provides instructions for installing the RAYLUX

URBAN series of White-Light illuminators.

WARNING

Version 1.1

GOLDEN RULES:

1. Ensure PSU lid orientation has

warning label in line with main

input glands

(see PSU diagram, right)

2. Ensure operating voltage is

correct for unit being installed

3. Ensure PSU is fully water tight

UBF Range

UBA Range

Summary of content (12 pages)

PAGE 1
LUX URBAN illuminators installation guide This installation guide provides instructions for installing the RAYLUX URBAN series of White-Light illuminators. Installation Steps 1. 2. 3. 4. 5. Feed cable through bracket solution Mount Illuminator Mount PSU Connect Illuminator to PSU Connect Photocell to PSU Overview Set Up Steps 1. Locate unit(s) as advised in lighting design 2. Position unit to provide illumination down onto a scene 3.
PAGE 2
LED output cable 5m (16.4ft) Photocell mounted on bracket, with 5m cable Bracket (not supplied – see optional bracketry – page 5) LED illuminator Adaptive illumination bolt LED output 2 LED output 1 Photocell input LED output 1 LED output 2 Mains input Photocell input Mains input ! 1.5m Isolate mains before removing cover 2 Mount PSU to flat surface or inside column Install in a well ventilated area Do not continually stare at lamp Specifications subject to change without notice.
PAGE 3
Installation 1 Feed cables through bracket 1 solution – see page 5 2 Mount and secure illuminator Typically Column Mounted. 3 Mount PSU – Suitable for inside most general lighting columns (excluding UBA48) can also be mounted externally. If external ensure glands are facing down. 2 4 Connect Illuminator to PSU: ! CAUTION: Red = +ve Black = -ve 3 (polarity sensitive) Installers can extend or reduce lead length using appropriate cable and weather proof box. Contact Raytec.
PAGE 4
Set Up 1 Locate unit(s) as advised in lighting design 2 Position unit to provide illumination down onto a scene ! Max x2 +max 5% uplift 3 If using UBA48 or UBA32 model, adjust the horizontal angle via Adaptive illumination™ ! CAUTION: Do not fully loosen AI bolt.
PAGE 5
Technical Drawings (Not to scale) Standard Bracketry UBF Range UBA Version • Tube outreach 125mm • o/d (outside diameter) 33.7 • i/d (inside diameter) 28 Optional Bracketry Wall Bracket • Finished in Silver • o/d (outside diameter) 42.4 • i/d (inside diameter) 34.4 Top Stub Bracket •Arm o/d 42.4, i/d 39.4 •Bracket Cup o/d 88.9, i/d 84.9 • Fits 76 Spigot • Twin Version Available Hockey Bracket • Arm o/d 42.4, i/d 39.4 • Bracket Cup o/d 88.9, id 84.
PAGE 6
Technical Specifications URBAN Series UBA48 UBA32 UBF24 UBF16 UBF8 Consumption <80W <50W <40W <25W <15W Lumen Output* 4700 3100 2350 1600 800 Colour Temp** 6500K 6500K 6500K 6500K 6500K CRI** 74 - 80+ 74 - 80+ 74 - 80+ 74 - 80+ 74 - 80+ Temp -50˚C to +50˚C -50˚C to +50˚C -50˚C to +50˚C -50˚C to +50˚C -50˚C to +50˚C Colour other RAL options available other RAL options available other RAL options available other RAL options available other RAL options available Angles
PAGE 7
PSU Specifications URBAN Series PSU UBA48 UBA32 UBF24 UBF16 UBF8 Input AC-100-240 universal<80W AC-100-240 universal<40W AC-100-240 universal<40W AC-100-240 universal<20W AC-100-240 universal<10W Fuse 2.5A antisurge 2.5A anti-surge 2.5A anti-surge 1A anti-surge 1A anti-surge Typical Output (Standard) 4.2A @ 14V 2.8A @ 14V 2.1A @ 14V 1.4A @ 14V 0.7A @ 14V Adjustable Power 10% - 100% 10% - 100% 10% - 100% 10% - 100% 10% - 100% Weight 1.85kg (4.1 lbs) 0.7kg (1.5 lbs) 0.7kg (1.
PAGE 8
Power Supply Diagrams (Not to scale) STandard psu URBAN UBA48 Model Telemetry Input - requires zero volt, latched input Power Adjust Photocell Sensitivity Mains Input 100V to 230V AC Auto-Sensing LED Output x2 (Polarity Sensitive) Photocell Input 8
PAGE 9
SLIMLINE PSU URBAN UBA32, UBF24, UBF16, UBF8 Models LED output 2 LED output 1 Photocell input Power Adjust Photocell Sensitivity Mains Input 9
PAGE 10
Trouble Shooting Ensure all tests are undertaken by a qualified, trained engineer.
PAGE 11
Step 3: Call Raytec for further assistance Note down: • Model and serial number of illuminator If the Raytec lamp is still not delivering the required performance, please contact us for further assistance.
PAGE 12
UK / Europe T: +44 (0) 1670 520055 F: +44 (0) 1670 819760 sales@rayteccctv.com Americas (Toll Free) T: +1 888 505 8335 ussales@rayteccctv.com UII/10/9.1 www.rayteccctv.