User Manual

Installation
CAUTION: Ensure cable glands
and PSU lid are water tight by
tightening the fixings
!
PSU connections.
4
UBA48 PSU needs to be mounted to a
wall or pole and then connected to the
mains. For all other Urban models, the
slimline PSU will be mounted inside the
column and connected to the mains.
5
Feed cables through bracket
solution – see page 5
Mount and secure illuminator
Typically Column Mounted.
Mount PSU – Suitable for
inside most general lighting
columns (excluding UBA48)
can also be mounted
externally. If external ensure
glands are facing down.
Connect Illuminator to PSU:
Installers can extend or
reduce lead length using
appropriate cable and
weather proof box. Contact
Raytec.
Connect Photocell to PSU.
2
3
4
5
1
1
3
!
CAUTION: Red = +ve
Black = -ve
(polarity sensitive)
2
LED output 1
LED output 2
Photocell input
Mains input
(UBA48 Model only)
!
3
LED output 1
LED output 2
Photocell input
Mains input
Column