Immerse yourself in the game in complete freedom with the Razer ManO’War wireless PC gaming headset with gaming grade latency-free 2.4 GHz wireless technology. Hear every detail, every position of your enemy when you have highperformance 50 mm Neodymium magnet drivers and immersive 7.1 surround sound. The Razer ManO’War allows for up to 7 days* of wireless gameplay (16 hours uninterrupted play on a single charge).
TABLE OF CONTENTS 1. PACKAGE CONTENTS / SYSTEM REQUIREMENTS ............................................ 3 2. REGISTRATION / TECHNICAL SUPPORT ........................................................... 4 3. TECHNICAL SPECIFICATIONS ........................................................................... 5 4. DEVICE LAYOUT .............................................................................................. 6 5. USING YOUR RAZER MANO’WAR .........................................................
1. PACKAGE CONTENTS / SYSTEM REQUIREMENTS PACKAGE CONTENTS Razer ManO’War Wireless Gaming Headset Wireless USB transceiver 2m extension dock 1m USB charging cable Important Product Information Guide SYSTEM REQUIREMENTS PC / Mac / PlayStation ® 4 A free USB 2.0 port SYNAPSE REQUIREMENTS Windows® 10 / Windows® 8 / Windows® 7 / Mac OS X (10.8-10.10) Internet connection At least 100MB of free hard disk space *Only Spectrum cycling lighting effect and 2.0 stereo audio output is available7.
2. REGISTRATION / TECHNICAL SUPPORT REGISTRATION Visit www.razerzone.com/razer-id to sign up for a Razer ID now to get a wide range of Razer benefits. For example, get real-time information on your product’s warranty status via Razer Synapse. To learn more about Razer Synapse and all its features, visit www.razerzone.com/synapse. If you already have a Razer ID, register your product by clicking on your email address within the Razer Synapse application and select Warranty Status from the dropdown list.
3. TECHNICAL SPECIFICATIONS HEADPHONES Frequency response: 20 - 20,000 Hz Impedance: 32 Ω ¬ at 1 kHz Sensitivity (@1 kHz): 110 ± 4 dB at 1 kHz max Input power: 50 mW Drivers: 50 mm, with Neodymium magnets Inner ear cup diameter: 50 mm / 0.16 in Connection type: Wireless USB Adapter Wireless range: 12 m / 40 ft Wireless frequency: 2.4 Ghz Battery life: Up to 16 hours with Chroma lighting / 20 hours without Chroma lighting Approximate weight: 375 g / 0.
4. DEVICE LAYOUT A. B. C. D. E.
F. Audio volume control G. Voice chat / game volume balance H. Wireless USB transceiver storage I. Micro-USB connector for charging J. Power / pairing button K. Wireless USB transceiver L. USB extension dock M.
5. USING YOUR RAZER MANO’WAR CHARGING YOUR HEADSET Connect the headset to a power source using the micro-USB to USB charging cable. UNDERSTANDING THE CHARGING NOTIFICATIONS The headset will send out notifications depending on its current status, as shown here.
LED NOTIFICATION SOUND NOTIFICATION None STATUS Charging None Fully charged Warning tone Low battery Solid Red LED Off Blinking Red For best results, please charge the battery fully the first time you use the Razer ManO’War headset. A depleted battery will fully charge in about 8 hours. POWER ON Press and hold the power for at least 2 seconds until you hear 2 short beeps.
POWER OFF Press and hold the power button for at least 3 seconds until you hear 2 long beeps. UNDERSTANDING THE POWER NOTIFICATIONS The headset will send out notifications depending on its current status, as shown here. LED NOTIFICATION Blinking Green 10 | For gamers by gamers™ SOUND NOTIFICATION None STATUS The headset is powered on and is syncing to the wireless USB transceiver.
USING THE AUDIO VOLUME CONTROL You will hear a short beep when you reach the minimum or maximum volume. Press the audio volume control located at the bottom of the headset to mute/unmute the audio. Note: Install Razer Synapse to enable the On-Screen-Display (OSD) feature whenever you change the volume.
USING THE WIRELESS USB TRANSCIEVER The wireless USB transceiver is located at the bottom of the headset. Push in the wireless USB transceiver until you hear a click then release your finger so that it ejects from the headset. To return the wireless USB transceiver, simply do these steps in reverse order. Note: If you are using the Razer ManO’War headset for the first time, you may be required to set the device as your system’s default playback device.
Step 2: Wait until the headset LED is lit green. This indicates that the headset is paired with the wireless USB transceiver. Note: The pairing attempt will be stopped if no connection can be established after 180 seconds. Your headset will flash red and 2 short beeps will be played indicating the connection failure. Step 3: Open your Sound settings from Control Panel > Hardware and Sound > Manage audio devices. You can also right-click your sound icon on the system tray and select Playback devices.
Step 4: In the Playback tab, select Razer ManO’War from the list and click the Set Default button. For Mac users Step 1: Connect the wireless USB transceiver to the USB port of your device and power up the headset.
Step 2: Wait until the headset LED is lit green. This indicates that the headset is paired with the wireless USB transceiver. Note: The pairing attempt will be stopped if no connection can be established after 180 seconds. Your headset will flash red and 2 short beeps will be played indicating the connection failure. Step 3: Open your Sound settings from System Preferences > Sound. Step 4: In the Output tab, select Razer ManO’War from the list.
Step 5: In the Input tab, select Razer ManO’War from the list.
You will hear a short beep when you reach the maximum volume for either the game or the voice chat. Press the microphone volume control located at the bottom of the headset to mute/unmute the microphone. The microphone’s LED will light up when muted. Note: Install Razer Synapse to enable the On-Screen-Display (OSD) feature whenever you change the volume.
USING THE USB EXTENSION DOCK Plug the USB extension dock to your gaming system to increase the reach of its USB port. You can use the USB extension dock to connect either the wireless USB transceiver or the charging cable. EXTENDING YOUR HEADSET’S LIFESPAN We recommend gently stretching the headset apart before placing it over your head to minimize headband stress. Please avoid overstretching the headset beyond its technical limits.
6. INSTALLING RAZER SYNAPSE FOR YOUR RAZER MANO’WAR Step 1: Make sure your Razer ManO’War is connected your computer. Step 2: Install Razer Synapse when prompted* or download the installer from www.razerzone.com/synapse. Step 3: Create your Razer ID or log into Razer Synapse with your existing Razer ID. *Applicable for Windows 8 or later. Note: Only Spectrum cycling lighting effect and 2.0 stereo audio output is available, 7.1 virtual surround is enabled with Razer Surround software installation.
7. CONFIGURING YOUR RAZER MANO’WAR Disclaimer: The features listed here require you to log in to Razer Synapse. These features are also subject to change based on the current software version and your Operating System. Your Razer ManO’War headset is equipped with various software customizable features to unleash its full power. CALIBRATION TAB A 3 step calibration wizard helps you set up your Razer ManO’War for virtual 7.1 surround sound.
Step 1 of 3 This step introduces the calibration process. Read the instructions carefully and ensure that you are in a quiet environment in order to hear the audio prompts properly. In this figure, the mannequin represents your position. The green arrows on each segment represent the target direction of the audio playback for that particular segment. Each orange line represents the last saved calibration settings configured on Razer Surround. Click Calibrate Now once you are ready to begin the calibration.
Step 2 of 3 Position yourself according to the point of reference indicated by the mannequin. The calibration process is divided into a series of segments. An audio prompt will be played for each segment. For the first segment, the sound should be perceived as coming from the direction marked by the green target arrow, roughly North-East of your point of reference. Your aim is to move the sound you hear such that you perceive it to be coming from this target direction. To achieve this, 1.
Click Next to continue to the next segment. Repeat the above, using the green target arrow for each segment as the target direction and continue until you complete the circle. Once all segments are calibrated, click Next to go to the next step.
Step 3 of 3 Click Experience Surround Sound to test your personalized sound environment. To tweak a particular section, simply click it to play its audio prompt and adjust the settings as desired. To reset the entire configuration, click Reset All. Otherwise, click Finish to confirm the settings.
A confirmation screen will be displayed. Click OK to save and exit the wizard.
AUDIO TAB The Audio Tab lets you control various options related to the audio you hear from your headset. Using the various sliders, you can: Adjust the overall volume of your headset Improve the bass output of your headset Normalize the loudness of audio played to avoid sudden and unpleasant increase in volume from effects such as explosions Enable voice clarity adjustments to improve the quality of incoming voice conversations.
MIC TAB The Mic Tab lets you control various options related to how your headset handles voice input via its microphone. Using the various sliders and options you can: Adjust the microphone input volume. You can also choose to mute your microphone. Adjust volume normalization level for microphone input Adjust the microphone’s sensitivity so it cuts out background noises and only picks up your voice. Enhance the clarity of microphone input by reducing ambient noise.
MIXER TAB The Mixer Tab allow you to adjust the volume for programs currently running on your system individually. Note: The Mixer Tab is not available for Mac OS systems. Customize the volume of audio for each program using the sliders.
EQ TAB The EQ Tab lets you filter various audio frequencies, controlling the overall tone of your audio output. A list of preset equalizer settings can be selected from the drop down menu, giving you easy access to various commonly used audio tones. You can also manually adjust each audio frequency using the sliders.
LIGHTING TAB The Lighting Tab is where you can customize the color of Razer logo lighting or select pre-loaded lighting effects. Changes made in this tab will be automatically saved to the current profile. Note that the color of the microphone LED cannot be changed. Lighting options include: Spectrum Cycling: Logo lighting will cycle between 16 million colors indefinitely. This is the default lighting effect. Breathing: making the logo lighting fade in and out of the selected color.
OSD TAB The OSD Tab allows you to configure the on-screen display settings.
8. SAFETY AND MAINTENANCE SAFETY GUIDELINES In order to achieve maximum safety while using your Razer ManO’War, we suggest that you adopt the following guidelines: 1. Should you have trouble operating the device properly and troubleshooting does not work, unplug the device and contact the Razer hotline or go to razersupport.com for support. Do not attempt to service or fix the device yourself at any time. 2.
9. LEGALESE COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION Copyright ©2016 Razer Inc. All Rights Reserved. Razer, the Razer Triple-Headed Snake logo, the Razer logo and other trademarks contained herein are trademarks or registered trademarks of Razer Inc. and/or its affiliated or associated companies, registered in the United States and/or other countries. Windows and the Windows logo are trademarks of the Microsoft group of companies.
COSTS OF PROCUREMENT For the avoidance of doubt, in no event will Razer be liable for any costs of procurement unless it has been advised of the possibility of such damages, and in no case shall Razer be liable for any costs of procurement liability exceeding the retail purchase price of the Product. GENERAL These terms shall be governed by and construed under the laws of the jurisdiction in which the Product was purchased.