User Manual

23
Ring Delay
This feature lets you select the number of times you want the phone to ring
before the answering system answers a call.
From the Answering System Menu:
1. Press the VOL (- or +) button to scroll to the Ring Delay.
2. Press SELECT soft key.
3. Use VOL(- or+) to select Line1 or Line2, press select softkey and then
use Vol(- or +) button to select from 2 rings to 6 rings or toll saver.
4. Press the SELECT soft key to save your selection .
NOTE: When the Toll saver is selected, the unit will answer the incoming call
after 3 rings if there is new message. Otherwise, the unit will answer the
incoming call after 5 rings.
Message Length
From the Answering System Menu:
1. Press the VOL (- or +) button to scroll to the Message Length.
2. Press SELECT soft key.
3. Use VOL(- or+) to select Line1 or Line2, press select softkey and then
use Vol(- or +) button to select from 1 to 3 minutes.
4. Press the SELECT soft key to save your selection.
Call Screening
From the Answering System Menu:
1. Press the VOL (- or +) button to scroll to the Call Screening.
2. Press SELECT soft key. Use the VOL (- or +) button to select On or Off.
3. Press the SELECT soft key to save your selection.
Message Alert
This feature set your answering system to give an alert tone every 10
seconds when there are new messages.
From the Answering System Menu:
1. Press the VOL (- or +) button to scroll to the Message Alert.
2. Press SELECT soft key. Use the VOL (- or +) button to select On or Off.
Default is Off.
3. Press the SELECT soft key to save your selection.
Programming the Telephone