- Thomson Wireless Business DSL Router User's Guide

63
E-DOC-CTC-20051017-0151 v1.0
Chapter 4
Basic Configuration
Adding a Port
Translation rule
Proceed as follows:
1 Click the Edit link of the TCP/UDP port definition of the game or application.
2 In the Protocol list, click the protocol the game or application uses.
3 In the Port Range box, type the port range the game or application uses.
4 In the Translate To box, type the port range to which the SpeedTouch™ has to
translate the ports specified under Port Range.
5 If you want to make a dynamic translation rule you must specify a trigger
protocol and port.
6 Click Apply.
As soon as the SpeedTouch™ receives outgoing traffic on this trigger
port, it will activate this translation rule.