Manual

CABLE BOX SETUP
This set up applies only when all channels are received through
a cable box. In this case, the VCR will automatically enter the
channel used to view cable box programming. Your VCR will
use this channel for all future timer recordings.
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recodings
3 Time
4 Channels
5 Setup
6 Preferences
7 Language
0 Exit
2. Press 4 to display the CHANNELS menu.
CHANNELS
I Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Channel List
5 Cable Box Setup
0 Exit
3. Press 5 to display CABLE BOX SETUP.Then select
one of the three choices.
CABLE BOX SETUP
Do you use your cable
box to receive ALL
channels or only SOME
Channels?
I ALL channels
2 Only SOME channels
3 Cancel setup
4,
If you selected ALL CHANNELS, enter the output channel
of your cable box (usually 03 or 04), or press the INPUT
button on your remote control for video line input if you
use AUDIO/VIDEO jacks.
CABLE BOX SETUP
On what channel does
the VCR receive signals
from the cable box?
(usually 3, 4. or Video)
Enter 01-13 or INPUT
Press MENU to cancel
Choosing the right set up for
your cable box
If you use your cable box to receive:
ALL channels- enter two numbers for
output channel of your cable box or
press INPUT if you connect your cable
box with AUDIO/VIDEO jacks
Only SOME channels- chose this
option if you only use the cable box
to unscramble premium channels only.
Cancel setup will take you to a menu
screen stating your VCR will not
control the cable channel during timer
recordings.
Video Line INPUT
For more information about the video
Line INPUT channel, refer to "How to
Find the TV's Video INPUT Channel" in
the References section of this manual,
9