Manual

MUTE Reduces volume to minimum level.
Numbers (0 through 9) Select a channel up to 99 by pressing
two numbers. Select a cable channel over 99 by pressing and
holding 1 until 1 - - appears on the screen. Then press the other
two numbers.
ON•OFF Turns a compatible TV off and on.
VOL Up and Down Raises and lowers sound of TV.
PLAYI NG A TAPE
1. Tune the TV to your VCR viewing channel (3, 4, or TV's
video input).
2. Insert a tape in the VCR.
If you have trouble getting a picture
on the screen, see "How to Find Your
TV's Video Input Channel" or
"Troubleshooting." Both are located in
the References section ofthis manual..
If the Auto Play feature is set to ON, the tape automatically
begins playback (if the safety tab on the cassette is removed).
• Press FWD or REV (FORWARD or REVERSEon remote) to
position the tape.
• Press PLAY,PAUSE (if necessary) on the VCR (PLAY on remote)
to begin tape play.
• Press PLAY•PAUSE (PAUSE on remote) for stop action.
• Press TRACKING up or down to remove any streaks from the
picture, if necessary.
• Press STOPoEJECTon VCR (STOP on remote) to stop playback.
Pause
If you pause, the VCR automatically
switches from pause to stop after a
few minutes to reduce tape wear.
24