Manual

VCR PLUS+
Enter PLusCode Number
(from TV Listing)
Press MENU to cancel
3. Enter the PlusCode ®shown in your local television
programming guide.
VCR PLUS+
Enter PLusCode Number
(from TV listing)
12876-
Press CLEAR to correct
Press MENU when done
4. PressMENU to enter the VCR PlusCode number.
Now often should this
program record?
I One time
2 Daily (every day)
3 Weekdays (M-F)
4 Weekly (once per week)
0 Cancel
5. Indicate how often you want the program to be recorded.
Program 1 (One time)
Channel 03 Cable
Start Time 08:00 PM
End Time 09:30 PM
Start gate 10/24/98 SAT
Tape Speed SLP
Press CLEAR to adjust
Press MENU to save
6. Change the speed with the SPEED button on the remote or
the program end time with the CLEAR button on the remote
(if necessary).
Changing the end time comes in handy when you are recording a
program, such as a sporting event, that may exceed the
scheduled broadcast time.
7. Press MENU to save the program.
PlusCode isa registered trademark of the Gemstar Development Corporation.
The VCRPlus+system ismanufactured under the license from Gemstar Development Corporation.
VCR Plus+ System Recording
The clock must be set correctly.
Insert a tape with the safety tab in
place and enough tape to record the
program.
The TIMER indicator appears in the
display when you turn off the VCR
and a timer recording has been set. It
flashes if there isno tape in the VCR.
PROGRAMS OVERLAP appears if you
have entered two programs where
the times overlap.
UNRECOGNIZED NUMBER... PLEASE
RE-ENTER appears when the VCR does
not recognize the PlusCode
programming system number.
Timer recordings will not be lost in
the event of an extended power
outage.
31