Manual

GO-TO SEARCH
The Go-To Search feature enables the VCR to quickly locate a
counter reading anywhere on the tape. When the VCR locates
the counter reading, it will begin playback.
1. Press STOP.
2.
3.
Press SEARCH on the remote until the GO-TO SEARCH menu
appears on the screen.
Press number buttons to enter the hour(s) and/or minutes of
the counter reading you want the VCR to "go to". Press
CLEAR on the remote to correct an entry.
4. Press FWD to search forward or REV to search in reverse.
5. Press STOP to stop Go-To searching.
GO-TO SEARCH
Current tape counter is
2:17:25
Press REV or FWD
to go to -:--:00
Press SEARCH to exit.
GO-TO SEARCH
Current tape counter is
2:17:25
Press REV or FWD
to go to 0:00:00
Press SEARCH to exit.
PRO-TECT PLUS TM LOCKING FEATURE
To disable the usage of the VCR, or to protect your timer
recordings, you can lock the VCR so that the buttons on the VCR
or remote won't work.
To Lock: Press and hold either the remote's POWER or OFF
button. All lighted digits on the front panel wil! flash when
activated. The digits will also flash if you turn on the VCR
when this feature is activated.
• To Unlock the feature and turn on the VCR: Press and hold
either the remote's POWER or VCR button for six seconds.
Locking Your VCR
If a timer recording is programmed,
make sure your VCR is turned off.
Locking your VCR prevents the VCR
from being accidentally turned on.
42