Manual

REC INDICATOR Lights when the VCR is recording.
TIMER INDICATOR ((_)) Lights during an express or timer recording or when the
VCR isset for a timer recording and the VCR is turned off. Flasheswhen the clock is
not set. "TIMER" Flasheswhen the timer recording isset and there isno tape
in the VCR.
VCR INDICATOR (Applies only if the VCR Viewing Channel is
3 or 4.) Pressthe TV.VCR button on the remote or front VCR panel to turn on or off.
• VCR Indicator on: Picture from VCR
• VCR Indicator off: Picture from the TV channel.
BACK PANEL
L
CH RFOUT
CH. 3/4 Switch Selects the channel to which you will tune the TV to see the VCR
picture if you connect the VCR using one of the basic hookups.
AUDIO and VIDEO IN Jacks Receives signals from another component, like a VCR
or camcorder, when it isconnected to these jacks. Use INPUT on the remote to select
"L" to record
from these jacks. For more information about the VIDEO INPUT, see "How to Figd
the TV's Video INPUT Channel" on the next page.
AUDIO and VIDEO OUT Jacks Sends signals from VCR to another component, like
a TV or VCR, when it is connected to these jacks.
ANT IN Jack Receives a signal from an antenna or cable system when attached.
RF OUT Jack Passessignal to TV using the cable supplied.
53