User Manual

ENGLISH

[32] POWER SWITCH

Use this switch to turn on and off your F 10XR mixer.

[33] EXTERNAL POWER SUPPLY INLET

Connect here the external power supply. The external power supply accepts power from 100 V to 240 V

AC 50-60 Hz.

[34] USB TYPE B PORT

Use this port to connect your computer for audio stereo recording of the MAIN MIX signal and audio

stereo playback. The computer connection does not require any driver and allows the recording and

reproduction of PCM audio at 44.1/48.0 kHz -16 Bit. The audio signal coming from a computer

connected to the USB port can be reproduced through Channel 9/10 audio path (see section [15] of

this manual).

REAR PANEL FUNCTIONS

[30] STEREO CHANNELS ROTARY KNOB SECTION

This section allows to control the level of every single stereo input channel.

[31] MAIN MIX ROTARY KNOB

The MAIN MIX rotary knob controls the level of the MAIN MIX.

FRONT PANEL FUNCTIONS

CONNECTORS

1/4” JACK CONNECTOR

Sleeve = Ground

Sleeve

Tip

Ring

Tip = Hot

Ring = Cold

BALANCED (TRS)

Sleeve = Ground

SleeveTip

UNBALANCED (TS)

Tip = Hot

Tip

Sleeve = Ground

Ring = Right Channel

Tip=Left Channel

PHONES (TRS)

Ring

Sleeve

XLR CONNECTOR

Connector pinout:

1 = earth

2 = audio signal (+ or “hot“)

3 = audio signal (– or “cold“)XLR Connector (F) XLR Connector (M)