Data Sheet

High efficiency 10” mid-bass. Very high sensitivity, excellent linearity. A copper

ring helps reducing distortion and smoothing the response up to 3 kHz.

Voice coil construction, suspensions and cone materials designed to survive at 350

Watt RMS power.

MID-BASS

L10/568H

2-inch inside-outside aluminum voice coil

400 Watt continuous program power handling

97.5 dB Sensitivity

50 Hz - 3 kHz Frequency range

M-roll surround and exponential cone geometry

Copper ring

A very light moving mass, a curve response linear above 3 kHz makes the L10/568H

a very good solution for high quality two way systems.

The 2” copper voice coil guarantee a very high power handling and perfect low

frequency control.

ApplicationsFeatures

300050

20 100 1.000 10.000 20.000

PART NUMBER 11130023

Professional Low Frequency Transducer

PAGE 1
High efficiency 10” mid-bass. Very high sensitivity, excellent linearity. A copper ring helps reducing distortion and smoothing the response up to 3 kHz. Voice coil construction, suspensions and cone materials designed to survive at 350 Watt RMS power. MID-BASS L10/568H Professional Low Frequency Transducer PART NUMBER 11130023 Features Applications 2-inch inside-outside aluminum voice coil 400 Watt continuous program power handling 97.
PAGE 2
8 holes ø 7 mm to 45° on ø 242 mm and on ø 247 mm General Specifications ø 260 mm 12 mm Nominal Diameter Rated Impedance Program Power 1 Power handling capacity 2 Sensitivity 3 Frequency Range Effective Piston Diameter Max Excursion Before Damage (peak to peak) Minimum Impedance Voice Coil Diameter Voice Coil Material Voice Coil Winding Depth Number of layers Kind of layer Top Plate Thickness Cone Material Cone Design Surround Material Surround Design 260/10 8 400 200 97.5 50 - 3000 210/8.3 40/1.6 6.