User`s manual

MENUMENU
DIGITAL󰚟INCUBATOR
13
Press MENU button on basic screen.
Select the species of birds with UP/DOWN button
and press ENTER button then it goes to incubation
conditions setting mode.
Set required temp. humidity, and egg turning angle & interval
with UP/DOWN button, and press ENTER button to
pass to next step.
This mode helps users to set temp. humidity,
and egg turning etc. according to their needs.
This mode is ideal for those persons
who are experienced in incubation.
Incubation start with Manual Mode
Hu
m
i
d
i
t
y
s
e
t
t
i
ng
Temperature setting
Temperature
21󰚟Days
37.5
37.0
021
3
Humidity
45
60
3
0󰚟21
.
.
.
.
.
.
21󰚟Days
It is recommended to raise the humidity setting to
over 60% from 1 or 2days before hatching.
(In areas of high ambient humidity, the humidity
may not need to be raised until the last half day -
after the chick is into the air space at the end of the egg.)
3. Function Setting
(2) Incubation start
with Manual Mode
3. Function Setting
(2) Incubation start
with Manual Mode
Setting of temperature of
early and middle stages of incubation.
Setting of temperature of
final stage of incubation.
Setting of date of temperature change
in the final stage of incubation.
Setting of humidity of
early and middle stages of incubation.
Setting of humidity of
final stage of incubation
Setting of date of humidity change
in the final stage of incubation.
▶󰚟Optimum incubation temperature of general birds at early and
middle stages is 37.5℃,󰚟and the temperature of
final stage is better to set at 37 three days
before the expected date of hatching (D-Day) .
User can optionally change the temperature
of early, middle, and final stages of incubation.
(Default settings: ①󰚟37.5, ②󰚟37.0, ③󰚟3days)
▶󰚟The optimum humidity depends on type of birds.
However the humidity of final stage
(3 days before incubation)is generally higher than that of
early and middle stages ④󰚟of incubation.
(Default settings: ④󰚟45%, ⑤󰚟60%, ⑥󰚟3days)
󰚟**󰚟󰚟󰚟Choose󰚟󰚟a󰚟󰚟󰚟kind󰚟󰚟󰚟󰚟󰚟**
*󰚟Chicken󰚟
*󰚟Duck
*󰚟Quail
*󰚟Pheasant
*󰚟Peafowl
*󰚟Goose
*󰚟Wildgoose󰚟
UPUP
DOWN
DOWN
ENTER
ENTER
*󰚟Select the species of birds with UP/DOWN button
and then press ENTER
[Humidity Setting]
[Temperature Setting]