User`s manual

󰚟**󰚟󰚟󰚟Choose󰚟󰚟a󰚟󰚟󰚟kind󰚟󰚟󰚟󰚟󰚟**
*󰚟G-Pheasant󰚟
*󰚟Turkey
*󰚟Other󰚟Birds󰚟
UPUP
DOWN
DOWN
ENTER
ENTER
①
②
*󰚟Select other birds with UP/DOWN button
and then press ENTER
D-Day
25󰚟Days025
[Incubation Date Setting]
DIGITAL󰚟INCUBATOR
15
3. Function Settings
▶ Press MENU button in basic screen.
▶ Select Other Birds by UP/DOWM button and then
press ENTER to go to setting.
▶ Set incubation date, temperature, humidity,
egg turning angel and egg turning interval
with UP/DOWM button, and press ENTER button
to save setting value.
[Refer to the page 13, 14]
Incubation Start for other birds
This function is used when user wishes to incubate
other birds which are not memorized in the incubator
menu setting.
User can change incubation conditions according to needs.
[Humidity Setting]
[Temperature Setting]
[Egg Turning Interval,
Incubation Date Setting]
[Incubation Start Notification]
[Egg Turning Angle Setting]
[During Incubation]
Start
Incubation
37.5
55
󰚟󰚟60
90˚
Temperature
25󰚟Days
37.5
37.0
021
①
②
③
3
45
21
④
⑥
Humidity
60
3
0󰚟
.
.
.
.
.
.
⑤
25󰚟Days
MENUMENU
▶ How to Set Consecutive Incubation Function : On Incubation date
setting, raise incubation date up to D-50 and then press UP button
one more, then “?” will be show and it starts Consecutive incubation.
Turning󰚟Angle
0
3
021
90
⑦
⑧
25󰚟Days
Turn󰚟Interval
60
0
3
021
⑨
25󰚟Days
(3) Incubation Start for
Other Birds
3. Function Settings
(3) Incubation Start for
Other Birds
What is Consecutive Incubation Setting?
This function is used if you want to continue incubation without
termination with same setting.