User`s manual

DIGITAL󰚟INCUBATOR
17
▶ You should turn OFF humidification function when you operate incubator without water,
or when you want to incubate with low humidity below 30%.
▶ Press MANUAL button 4 times and then press DOWN button continuously until OFF indication is showing.
Then, press ENTER button to turn humidification off.
If you want to humidification turn ON, set humidity over 30%
Humidification Function ON/ OFF Setting
Egg Turning Test
37.5
55
󰚟󰚟60
90˚
Chicken
37.5
55
󰚟󰚟60
90˚
ENTER
OFF
21
Humidity
OFF
3
0󰚟
.
.
.
.
.
.
21󰚟Days
MANUAL
4Times 5Times
MANUAL
YES
Parameter󰚟saved
[Humidification ON]
[Humidification OFF]
▶ Press ENTER button for about 5sec. during incubation
period to check egg turning.
▶ If egg turning does not work, check whether you assembled
the egg turning plate properly.
[Refer to the page 10.]
󰚟󰚟60
90˚
ENTERENTER
Incubation Condition Reset during Incubation
▶ This is used when you want to change incubation
setting mode again during incubation.
Press MANUAL button during incubation, then
Temp. display will blink.
If you want to change Temp. reset with UP/DOWN button
and then press ENTER to save.
Using this method, you can also reset humidity, egg turning
angle, and egg turning interval. If you do not want to change
setting, just press MANUAL button then it passed to next stage.
Also, it returns to incubation screen if you do not press
any key for about 10sec.
▶ You can go directly to the needed setting mode by
pressing MANUAL button several times according to your needs.
It can be used when you want to check the current incubation
condition during incubation.
▶ If you press ENTER button, LCD display indicates
setting Temp. & Humidity.
MANUAL
SHIFT
MANUAL
SHIFT
󰚟󰚟60
90˚
Parameter󰚟saved
[Setting Save Message]
(6) Incubation conditions reset /
How to Set Egg Turning Test /
Turn ON, OFF Humidification Function
3. Function Settings
3. Function Settings
(6) Incubation conditions reset /
How to Set Egg Turning Test /
Turn ON, OFF Humidification Function