User`s manual

18
DIGITAL󰚟INCUBATOR
▶ When starting egg turning, animation showed
on display with melody.
Egg Turning Check Function
Power Failure Alarm Function
▶󰚟When you first switch on the power, or
in case of power failure during incubation,
display shows this icon and incubator
and incubator alarm sounds for about 10sec.
Press ENTER to remove.
Chicken
37.5
55
󰚟󰚟60
90˚
Chicken
37.5
55
ENTER
Water Shortage Detecting Function
It takes about 1min. to return to normal display
after you refill water.
Chicken
37.5
55
󰚟󰚟60
90˚
Chicken
37.5
55
󰚟󰚟60
90˚
Chicken
37.5
55
󰚟󰚟60
90˚
Chicken
37.5
55
󰚟󰚟60
90˚
▶ When water is short, humidification icon
is changed and water supplem ent
alarm sounds after 5 min. This alarm continues
every 30 sec.
▶ When there is any problem on water detecting
sensor, humidification icon is changed like this
, and alarm sounds with message.
(1) Egg Turning Check / Alarm for water supplement /
Abnormal High or Low temperatue Alarm /
Power Failure Alarm Function
4. Other Functions
(1) Egg Turning Check / Alarm for water supplement /
Abnormal High or Low temperatue Alarm /
Power Failure Alarm Function
4. Other Functions
Abnormal High or Low Temperature Alarm Function
※ Alarm call automatically turned off after 1min. but you should press ENTER button to switch off alarm indication.
▶ When incubator temperature is different from
setting value, icon is changed ,
and display indicates current temp. and temp.
difference alternatively.
Chicken
39.5
55
󰚟󰚟60
90˚
Chicken
37.5
55
󰚟󰚟60
90˚
When temp. difference is 2℃, it indicates 39.5℃ and +2.0 alternatively ( setting 37.5℃)
When temp. difference is -3℃, it indicates 34.5℃ and -3.0 alternatively ( setting 37.5℃)
<Example>
* How to Set Abnormal Low Temp. Setting (When incubator temp. is lower than setting temp.)
[ Setting Range: 0.0℃ ~ - 5.0℃, Default Setting : - 3.0℃ ]
Select with UP/DOWN button Set with UP/DOWN button
YES
Parameter󰚟saved
ENTER
SET󰚟UP
BACK
ENTER
High󰚟Temp.󰚟Set
H.CAL
High󰚟
Temp
HiErr
Low󰚟
Temp
LoErr
High󰚟Error
H i g h 󰚟 T e m p . 󰚟 E r r o r
󰚟 󰚟 󰚟 o v e r 󰚟 󰚟 󰚟 󰚟 󰚟 3 . 0 ˚ C 󰚟
ESC
SET
When MENU screen
is shown, press
SET UP/BACK button
and display return
to basic screen.
* How to Set Abnormal High Temp. Setting (When incubator temp. is higher than setting temp.)
[ Setting Range: 0.0℃ ~ 5.0℃, Default Setting : 2.0℃ ]
Select with UP/DOWN button Set with UP/DOWN button
YES
Parameter󰚟saved
ENTER
SET󰚟UP
BACK
ENTER
Low󰚟Temp.󰚟Set
High󰚟
Temp
HiErr Unit
Low󰚟
Temp
LoErr
Low󰚟Error
L o w 󰚟 T e m p . 󰚟 E r r o r
󰚟 󰚟 󰚟 u n d e r 󰚟 󰚟 - 4 . 0 ˚ C 󰚟
ESC
SET
When MENU screen
is shown, press
SET UP/BACK button
and display return
to basic screen.