SDS

Technical Report No. 64.165.12.02355.01
Dated 2012-12-12
TÜV Product Service Ltd. Guangzhou Branch Technical Report No.: 64.165.12.02355.01
TÜV SÜD Group
5F, Communication Building, 163 Pingyun Rd, Huangpu West Ave. Engineer: Kevin Zhang
Guangzhou 510656 P.R. China 2012-12-12
Tel.: [phone], Fax: [phone] Page 6 of 12
Product name: GLOW PRODUCTS
8. Exposure controls/personal protection
(a) Control parameters
OSHA
NIOSH
Component
PEL
-
TWA
PEL
-
STEL
TLV
-
TWA
TLV
-
STEL
Dimethyl phthalate
Not Established
5 mg/m
3
5 mg/m
3
Not Established
Hydrogen peroxide
1 ppm
1.4 mg/m
3
Not
Established
1 ppm
1.4 mg/m
3
Not Established
(b) Appropriate engineering controls
Do not inhale dusts or smoke of h
eated product. Ensure adequate ventilation. Follow the maximum
workplace concentration values. When the concentration in the air is over the maximum
occupational exposure limit, an approved respiratory protection apparatus must be worn.
(c) Personal protective equipment
Respiratory protection:
In case of inadequate ventilation wear respiratory
protection.
Hand protection:
Wear protective gloves.
Eye/face protection:
In case of risk of splashing, wear protective
glasses/face-shield.
Skin/body protec
tion:
Repeated or prolonged exposure: Chemical resistant
apron.
Protective gloves, chemical-resistant. The
manufacturer recommends the following glove
materials: nitrile rubber. Safety gloves should be
selected for the actual conditions of use and in
accordance with the instructions for use provided by
the manufacturer.