User Manual

www.ReadyLIFT.com - Phone: [phone]
Installation Instructions 69-3486
3
Revised Feb-2014
Raise the vehicle and support the frame with jack stands.
Remove the wheels and tires.
Remove the front plastic debris plate.
TheBillofMaterialsrepresentsthecomponentcontentsofthiskit.Allhardwareisofthehighestgradeandthecomponentsare
manufacturedtoexactingspecificationsforatroublefreeinstallation.Usetheattachedtorquespecificationschartwhenfinal
tighteningofthenutandboltsaredone
.
Bill of Materials
Disconnect the ABS sensor at the frame.
4.
2.
1.
3.
DESCRIPTION QTY
1"CupO‐Ring 2
1"To5/8"ShortMisSpacer 2
1"To5/8"WideBaseSpacer 2
1"UniballF1Spec 2
1"UniballCupCover 2
1/2"G8FlatWasher 2
1/2"‐20G8StoverNut 2
1/4"G8FlatWasher 4
1/4"‐20X1"G8
HexBolt 2
2007+Chevy1500UCAPinSteelArm 2
A‐ArmGM150007‐Up.Left 1
A‐ArmGM150007‐Up.Right 1
BushingHalf 8
BushingInnerSleeve 4
BushingWasher 8
DriverDifferentialRelocationBracket
1
FrontDifferentialSkidPlate
1
GreaseTube 1
DESCRIPTION QTY
M10FlatWasher
8
M10‐1.25SerratedFlangeNuts
6
M10‐1.50C‐LockNut(Stover)
4
M10‐1.50x6010.9HexHeadBolt
4
M10x30ThreadCuttingBolt 3
M12FenderWasher
2
M12FlangeNut
2
M12FlatWasher
2
M12SocketCap35mm
1
M12SocketCap45mm
1
M12SocketCap70mm
1
M12SocketCap80mm
1
M12SplitLockWasher
4
M12x35HeadBolt
4
PassengerDiffRelocationBracket
1
SpacerForAbsLine 2
SteelStrutExtension54mmTall
2
UniballSnapRing.Black 2