1340e corretto instructions

12
OPERATION AND FEATURES
CONTROL PANEL OPERATION
After reading all the instructions, confirm that all controls on fireplace are in the OFF
position. Plug the fireplace into a 15AMP/120Volt outlet. The control panel is located at the
top right of your fireplace.
MAIN POWER Press the O/I button for main power.
Note: When the O/I switch is turned OFF, all other fireplace functions will stop.
NOTE When turned to standby the embers of the flame will not immediately go out.
This is a designed feature to represent the embers of the fire slowly fading out.
NOTE Although the heater has been turned o the fan may still run to prevent
over-heating.
TECHNICAL SPECIFICATION Supply: 120V~60Hz. Rated Power: 1400W
!
!
ON
OFF
POWER COLOR HEATER TEMP. TIMER
POWER
Turns unit
on and o.
TIMER
Auto shuto
between 0-8 hours.
HEATER
Changes heat
from o to low
or high.
COLOR
Changes color
of flames with
six options.
TEMP.
Changes heat
setting. Between
62°F and 82°F