8" Convert to Gel Log Set # 2610 Instruction Manual
610 Instructions and warnings for use Parts List Number Description Part Number Quantity 1 2 3 4 5 6 7 8 9 Left Log Middle Log Right Log Front Log Rear Log Grate Lift Assembly Lava Rock 1" Phillips Head Bolt 2610-R A 2610-R B 2610-R D 2610-R E 2610-R F 2610-R G 2610-R H 4090 9742 1 1 1 1 1 1 1 1 bag 10 Before starting assembly, review parts list making sure you have all the pieces in good condition. If there are any damaged or missing parts please call customer service at 1-800-654-1704.
2610 Instructions and warnings for use Step Two Figure 2 5 4 Raise handle on lift assembly to the open position. Place Front Log (4) and Rear Log (5) as shown in figure 2 Figure 2 1 Step Three Figure 3 Locate the Left Log (1) with the "V" end of the log facing towards the front. Attach log to metal brace with two 1" bolts. NOTE: Use caution not to over tighten bolts. Figure 3 Rev.
2610 Instructions and warnings for use Step Four Figure 4 1 5 2 3 4 Repeat step three with the remain two logs. Use figure 4 as reference for placing the logs. After all logs have been fastened to Lift Assembly slowly lower lift arm. If the top three logs don't rest on Front Log (4) you may need to adjust the position of the Rear Log (5) left or right. Place assembled unit in your existing fireplace. Add decorative lava rock around the base of your fireplace.
