Installation Guide

4
IMPORTANT SAFETY INFORMATION
SAVE THESE INSTRUCTIONS
DESCRIPTIONS OF WARNINGS
WARNING
!
• Risk of electric shock
• Do not open
• Non-user serviceable parts inside
!
!
NOTE
CAUTION
WARNING
Procedures and techniques that are considered important
enough to emphasize.
Procedures and techniques which, if not carefully followed,
will result in damage to the equipment.
Procedures and techniques which, if not carefully followed,
will expose the user to the risk of fire, serious injury, illness
or death.
NOTE This equipment has been tested and found to comply with the limits for
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
with radio or television reception. That can be determined by turning the equipment
o and on. The user is encouraged to try to correct the interference by one or
more of the following measures:
!
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device may accept any interference, including interference that
may cause undesired operation of the device.
NOTE A 15amp, 120-volt circuit is required. A dedicated circuit is preferred but
not essential in all cases. A dedicated circuit will be required if, after installation,
the circuit breaker trips or the fuse blows on a regular basis when the heater is
operating. Additional appliances on the same circuit may exceed the current
rating of the circuit breaker.
!
If you have any questions about our products, please contact
Real Flame® customer service at 1-800-654-1704.