Installation Guide

7
OPERATION AND FEATURES
!
NOTE Although the heater has been turned o, the fan may still run to prevent overheating.
!
NOTE If the display screen reads 88 or EE, verify that all vents on the firebox are clear of
any obstructions, then unplug the firebox and plug it back in to reset the firebox. If this
problem persists, please contact Real Flame at 1-800-654-1704.
CARE AND MAINTENANCE
Remote Control Battery Replacement
• Slide the battery cover open by squeezing the release lever while pulling the
battery out. Please see the underside of remote for instructions.
• Replace the dead battery with one CR2025 battery. Replacement batteries
are not included with the firebox.
• Do not dispose of the dead battery in the municipal trash. Batteries should be
disposed of at a local collection point for recycling batteries.
• Close the battery cover.
Light Emitting Diode
This firebox is fitted with LED (Light Emitting Diode) bulbs in place of conventional bulbs.
These generate the same light levels as conventional bulbs, but use a fraction of the energy.
These LED bulbs are maintenance free and should not require replacing during the life of the
product.
Cleaning
!
WARNING Disconnect power before attempting any maintenance or cleaning to reduce
the risk of fire, electric shock, injury or death.
!
CAUTION When transporting or storing the unit and cord, keep in a dry place, free from
excessive vibration and store so as to avoid damage.
• Dust the unit using a clean dry cloth.
• Use warm water and a clean cloth to wipe o all painted surfaces. Do not use abrasive cleaners.
• Use a standard glass cleaner for the glass panel of the unit.