Instructions / Assembly

Customer Service: 1-800-654-1704 in USA

custserv@realﬂame.com

Real Flame®

7800 Northwestern Ave.

Racine, WI 53406

R0001-BK Rubber Hose Cover

Instruction Manual

1.) Remove hose cover from packaging and lay out on a at surface.

2.) Spread open and bend back bottom of hose cover and insert LP or NG hose into the cover.

3.) Lay hose and hose cover down on a at surface and follow directions included in your re table owners

manual for directions on connecting the hose to your gas supply.

Parts

Assembly and Use

LP/ NG

Hose

R0001-BK

Hose end may vary

To Fire Table

WARNING

Disconnect your hose from the gas supply

before installing the hose cover.

The hose should not be disconnected from the

control valve on the ﬁre table.

The hose and hose cover are a possible tripping

hazard. Make sure anyone in the area of the ﬁre

table is aware of its placement.

PAGE 1
R0001-BK Rubber Hose Cover Instruction Manual Parts ! WARNING Disconnect your hose from the gas supply before installing the hose cover. The hose should not be disconnected from the control valve on the fire table. R0001-BK The hose and hose cover are a possible tripping hazard. Make sure anyone in the area of the fire table is aware of its placement. Assembly and Use 1.) Remove hose cover from packaging and lay out on a flat surface. 2.
PAGE 2
R0001-BK Manuel d'utilisation du couvre-tuyau en caoutchouc R0001-BK Manual de instrucciones de la cubierta de manguera de goma Pièces/ Partes R0001-BK ! ! Attention Déconnecter le tuyau de l'alimentation en gaz avant d'installer le couvre-tuyau. Le tuyau ne doit pas être déconnecté du sur la table à feu. Le tuyau et le couvre-tuyau peuvent causer des trébuchements. Assurez-vous que ceux se trouvant dans la zone de la table soient au courant de son placement. Assemblage et utilisation 1.