Replacement Part List

7
This section will explain in details how to
make high pressure washer ready for use.
SAFETY DEVICES
 The unloader valve can reduce pressure
if it exceeds pre-set values.
Locking device on trigger gun (see
illustration at the beginning of this manual):
The trigger gun features a locking device.
When the knob is activated, the trigger gun
cannot be operated.
THERMAL SENSOR
A thermal sensor protects the motor against
overloading. The machine will restart after
a few minutes when the thermal sensor has
cooled.
Screw the water inlet coupling (3) tight on
to the water inlet Note: The inlet filter (A)
must always be fitted in the water inlet pipe
to filter out sand, lime stone and other
impurities as these will damage the pump
valves.
Caution: Failure to fit the filter will
invalidate the guarantee.
Connect the garden hose with a standard
quick coupling
Attach the high pressure hose to the trigger
gun and machine.
Detach the high pressure hose by pressing
the pawl (A) or button (B)
Push the lance into the trigger gun
When inserted turn it. Caution: Make sure
the lance is properly fixed to the gun
Attach the nozzles. Caution: When
attaching the nozzle the button (A) on the
nozzle should come out again. Check
GB
2. First time instructions
3.1 Connection of garden hose
3.2 Mounting of high pressure hose
3.3 Mounting of lance and nozzle
3. Operation instructions
A
B
1
A