Replacement Part List

-6-
start again when you re- activate the
trigger gun (11)
5.9 Adjustable Nozzle
The pressure can be adjusted by
turning the adjustable nozzle (14).
WARNING: Do not do this under
operation to avoid that the hand hits
the jet.
5.11 Angle Nozzle (optional)
The angle nozzle (17) can be used for
many applications e.g. cleaning the
underbody of a car, underneath a lawn
mover without being splashed back
with debris, etc.
After attaching the angle nozzle (17),
be aware of the moment on the lance
trigger gun (11) and lance (13) as the
jet is coming out perpendicular to
these.
5.12 Patio Cleaner (optional)
5.10 High pressure detergent bottle
1. Unscrew the container (A) from the
high pressure detergent bottle (15).
2. Add detergent to the container (A)
and screw the container to the high
pressure detergent bottle (15)
3. Adjust the amount of detergent
with the button (B)
4. Foam equipped quick connector.
Press (C), then insert into the gun.
Caution: When attaching the
detergent bottle, the button (C)
should come out again. Check
before activating the trigger that
the nozzle is properly fixed.
The patio cleaner is a powerful
accessory for cleaning patio, driveways,
etc.
1. Insert the extension lance (A) into
to the housing (B).
2. Fix the extension lance (A) with the
two screws to the housing (B).
3. Insert the rotor arm (C) into the
extension lance.
4. Insert the U-pin (D) to fix the rotor
arm (C).
NOTE: Make sure the rotor arm (C) is
properly fixed to the extension lance
(A) with the U-pin (D).
NOTE: Do not use the Patio Cleaner
(21) as a broom but let it surf smoothly
over the surface.
B
C
A