Replacement Part List

EN
5
SAFETY DEVICES
 The unloader valve can reduce
pressure if it exceeds pre-set values.
Locking device on trigger gun (see
illustration at the beginning of this
manual): The trigger gun features a
locking device. When the knob is
activated, the trigger gun cannot be
operated.
THERMAL SENSOR
A thermal sensor protects the motor
against overloading. The machine will
restart after a few minutes when the
thermal sensor has cooled.
This section will explain in details how
to make you high pressure washer
ready for use.
Slide the storage hooks into the
holders.
1. Insert the extension lance into to
the housing
2. Fix the extension lance with the
two screws to the housing
3. Insert the rotor arm into the
extension lance
4. Insert the U-pin to fix the rotor arm.
NOTE: Make sure the rotor arm is
properly fixed to the extension
lance with the U-pin
1. Screw the water inlet coupling (1)
tight on to the water inlet Note:
The inlet filter (2) must always be
fitted in the water inlet pipe to
filter out sand, lime stone and
other impurities as these will
damage the pump valves.
Caution: Failure to fit the filter will
invalidate the guarantee.
3.1 Connection of garden hose
3. Operation instructions
3
4
2
1
2.1 Mounting of storage hook
2. First time instructions
2.2 Mounting of Patio Cleaner
1. Safety instructions