2-DRAWER KITS FOR SHELF TOWER AND CUBBY TOWER ASSEMBLY AND INSTALLATION INSTRUCTIONS
ASSEMBLY AND INSTALLATION INSTRUCTIONS 2-DRAWER KITS 1 C A D E F B H PARTS LIST Bottom Drawer Kit A B C D E F G H I J K G Drawer, Small (Qty 1) Drawer, Large (Qty 1) Drawer Front, Small (Qty 1) Drawer Front, Large (Qty 1) Drawer Slide (Qty 4) Shelf Slide (Qty 4) Drawer Knob (Qty 2) Screw, 0.445" (Qty 8) Screw, 0.6" (Qty 8) Screw, 1.2" (Qty 4) Screw, 1.
ASSEMBLY AND INSTALLATION INSTRUCTIONS 2-DRAWER KITS 2 I C I I A D I B 2.1 Position Small Drawer Front (C) on each Small Drawer (A) and secure with two 1.2" Screws (J). 2.2 Position Large Drawer Front (D) on Large Drawer (B) and secure with two 1.2" Screws (J). 3 K G H H E NOTE: Drawer Slides (E) and Shelf Slides (F) are shipped assembled. Lift Slide Release to separate Drawer Slide from Shelf Slide. H E H SLIDE RELEASE 3.
ASSEMBLY AND INSTALLATION INSTRUCTIONS 2-DRAWER KITS 4 4.1 For each Drawer, position Shelf Slide (F) over predrilled holes in shelf side panel, then secure with two 0.6" Screws (I) at locations shown. 4.2 Repeat for second Shelf Slide (F). Tip: For best results, use a small level to ensure Shelf Slides (F) are properly positioned before tightening.
ASSEMBLY AND INSTALLATION INSTRUCTIONS 5 2-DRAWER KITS 5.1 Slide each Drawer onto Shelf Slides until slides latch.
