Owner Manual

ManualsBrandsRebrilliant ManualsRack Shoe Storage30 Pair Shoe Rack

VERY IMPORTANT!

ATTENTION: Assemble all parts on a solid surface (not carpet) or damage will occur!

Connectors (6)

Uprights (12)

Bases (2)

Steel Tubes (20)

SHOE RACK PARTS LIST

Assemble all parts on a smooth, hard surface

such as wood or concrete.

Indentation

The ends of the steel tubes are

intentionally indented to ease

assembly.

DO NOT assemble on

soft surfaces such as

carpet or damage

will occur.

Firmly tap tubes all the way into each

socket. If this is not done, the product will

not stay together.

STEP 1 STEP 2 STEP 3 STEP 4 STEP 5

STEP 6 STEP 7 STEP 8 STEP 9

STEP 1: Assemble Bases.

Firmly tap tubes into sockets.

STEP 2: Turn assembly from Step 1 over.

CURVES OF BASES MUST FACE

IN THE SAME DIRECTION

STEP 4: Assemble Uprights.

Firmly tap tubes into sockets.

STEP 5: Turn assembly from Step 4 over.

ENDS OF UPRIGHTS MUST FACE

IN THE SAME DIRECTION

STEP 6: Repeat with remaining Uprights. STEP 7: Assemble Connectors.

Firmly tap tubes into sockets.

STEP 8: Turn assembly from Step 7 over.

CURVES OF CONNECTORS MUST

FACE IN THE SAME DIRECTION

STEP 9: Repeat with remaining Connectors.

TURN PAGE OVER FOR REMAINING STEPS

Assemble on

solid surface

Tap tubes all the

way into sockets.

STEP 3: Firmly tap tubes all the way

into sockets.

Tap tubes all the

way into sockets.

Tap tubes all the

way into sockets.

CURVES OF BASES

MUST FACE IN

SAME DIRECTION

CURVES OF CONNECTORS

MUST FACE IN SAME

DIRECTION

ENDS OF UPRIGHTS MUST

FACE IN SAME DIRECTION

Summary of content (2 pages)

PAGE 1
ATTENTION: Assemble all parts on a solid surface (not carpet) or damage will occur! VERY IMPORTANT! STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 Assemble all parts on a smooth, hard surface such as wood or concrete. DO NOT assemble on soft surfaces such as carpet or damage will occur. ENDS OF UPRIGHTS MUST FACE IN SAME DIRECTION CURVES OF BASES MUST FACE IN SAME DIRECTION Assemble on solid surface. Indentation The ends of the steel tubes are intentionally indented to ease assembly.
PAGE 2
ASSEMBLIES DO NOT TAP FROM TOP STEP 10 STEP 12 STEP 13 STEP 11 CURVES OF BASE AND CONNECTORS FACE IN SAME DIRECTION SHOWN: Completed assemblies from front page. STEP 12: Turn assembly over and tap connections as shown in Step 11. STEP 10: Connect Base and Uprights. STEP 11: Tap connections together as shown, on a firm surface only. WARNING! Do not tap connections from the top or damage will occur.