OWNER’S MANUAL 3-TIER NSF 48” x 18” x 75.
PARTS LIST Your 3-Tier NSF 48”x18”x75.5” Rolling Garment Rack should include the following parts. Please inspect box contents to ensure you have received all components. You will need no additional tools for assembly.
ASSEMBLY INSTRUCTIONS STEP 1 Screw each CASTER (I & J) into the bottom of each BOTTOM POLE (C). Turn clockwise to screw in place. Use the wrench to tighten each CASTER (I & J) . Make sure LOCKING CASTERS (I) are on the same side. C (4) I (2) J (2) K (1) C (4) G (8) Use the provided caster wrench to tighten completely. Failure to do as instructed could result in the caster stem breaking.
ASSEMBLY INSTRUCTIONS STEP 3 Place SHELF (A) on its side and slide (4) BOTTOM POLES (C) through the 4 corner cylinders in SHELF (A). Make sure SHELF (A) corner cylinders are positioned over SLIP SLEEVES (G). A (1) Stand the unit upright. Note: • The level side of SHELF (A) is the TOP side (the logo on corner cylinders should be right-side up). A • Use a rubber mallet, if needed, to secure SHELF (A).
ASSEMBLY INSTRUCTIONS STEP 5 Screw TOP POLES (B) into BOTTOM POLES (C) by pole connectors. B (4) The tops of TOP POLES (B) are indicated by BLACK END CAPS. B C STEP 6 A (1) Repeat STEP 2 & 3 to place the 3rd SHELF (A) at the top of TOP POLES (B). G (8) Note: Use a rubber mallet, if needed, to secure SHELVES (A).
ASSEMBLY INSTRUCTIONS STEP 7 Hang the HANGING BRACKET (E) over the wire strand in the middle of the top SHELF (A). Do the same for the other side. D (1) E (2) F (2) Fasten HANGING SCREW (F) through HANGING BRACKET (E) to HANGING ROD (D). Do the same for the other side. STEP 8 Place 1 pair of SLIP SLEEVES (G) at the desired level of each of the POLES on the width side, slide SIDEBAR w/ 4 HOOKS (H) onto SLIP SLEEVES (G).
SERVICE PARTS LIST – (Chrome) Customer Service provides the following replacement parts: Part Number Description Part Number Description 1) Slip Sleeve 8) Bottom Pole 2) Hanging Bracket 9) Pole Connector 3) Hanging Screw 10) Top Pole 4) Sidebar w/ 4 Hooks 11) Hanging Rod 5) Non-locking Caster 12) End Cap 6) Wrench 13) Shelf 7) Locking Caster 13 1 12 2 11 3 10 9 4 8 5 7 6 6
SERVICE PARTS LIST – (Bronze Anthracite) Customer Service provides the following replacement parts: Part Number Description Part Number Description 1) Slip Sleeve 8) Bottom Pole 2) Hanging Bracket 9) Pole Connector 3) Hanging Screw 10) Top Pole 4) Sidebar w/ 4 Hooks 11) Hanging Rod 5) Non-locking Caster 12) End Cap 6) Wrench 13) Shelf 7) Locking Caster 13 1 12 2 11 3 10 9 4 8 5 7 7 6
WARNINGS 1. Read and understand all instructions. Failure to follow all instructions may result in injury and/or damage. 2. Use the provided caster wrench to tighten casters completely. Failure to do as instructed could result in the caster stem breaking thereby causing the garment rack to collapse. 3. The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions or situations that may occur.
PRODUCT REGISTRATION Thank you for purchasing this 3-Tier NSF 48”x18”x75.5” Rolling Garment Rack.
LIMITED WARRANTY 10
CONTACT US QUESTIONS? NEED PARTS? WE ARE HERE TO HELP! Please feel free to contact us. There are no questions too small, or any problems too big. We’re committed to providing our customers with the highest level of service.
