Operation Manual

2291-4-05/1
10.4 Hängen Sie die Gummis
an der Innenseite der Schale
aus und nehmen Sie den Be-
zug ab.
Bezug in umgekehrter Rei-
henfolge wieder befestigen
(siehe Bilder 10.4 – 10.1).
10.4 Unhook the rubber loops
from the inside of the shell
and remove the cover.
Fasten the cover in the
reverse sequence (see
diagrams 10.4 – 10.1).
D GB
10.3 Schlaufen Sie die Gum-
mis aus und ziehen Sie den
Kopfstützenbezug ab.
10.3 Unhook the rubber loops
and pull off the head support
cover.
sto2291-4-05/1 disk STM Recaro Young Profi 0+, Bild 10.4 Montageanleitung
erst. 02.06.2005 ps / geänd. am 19.08.05 ps, 24.08.05 tk, 20.01.06 tk, 27.01.06 tk,
03.03.06 tk
2308F-4-00/1
10.4
2190F-4-00/1
10.3