Safety Instructions

Caution

• Do not operate the RecoveryAir PRO Compression System while operating a vehicle.

• Do not store or transport the RecoveryAir PRO Compression System beyond the specified temperature, humidity,

and atmospheric pressure range.

• Do not use the RecoveryAir PRO Compression System beyond the specified temperature range: 10 to 30°C (50 to 86°F).

• Do not use the RecoveryAir PRO Compression System beyond the specified humidity range: 30%rH–75%rH,

non-condensing.

• Only use the RecoveryAir PRO Compression System up to 3000m above mean sea level.

• To prevent any damage to the RecoveryAir PRO Compression System, keep it away from dust, lint, and dirt. Keep

away from sources of heat or moisture.

• ●To prevent any damage to equipment, use only accessories, detachable parts, and materials described in this

User Manual.

• While in use, place the pump on a horizontal firm surface only. Do not place the pump on a bed, blanket, mattress,

pillow, or soft furniture. Do not cover the pump.

• The equipment is to be installed and put into service according to the EMC information provided in Chapter 11 -

EMC Manufacturer Declarations.

• Portable and mobile RF communication equipment might affect the equipment.

• For indoor use only.

• Use only the DC power adapter provided with the pump.

• When the system has been stored in extreme temperature conditions of -20°C (-4°F) or 70°C (158°F) between

uses, wait for two (2) hours before using the system.

• The massage sensation should be pleasant and comfortable. If you experience pain or discomfort during or after the

massage or if there is onset of bruising or irritation during or after the massage, discontinue use and consult your physician.

• Do not hand or machine wash. Surface wipe only.

• Do not allow liquid to get into the air inlets.

• Do not use bleach.

• Do not dry clean.

• Do not wring, iron, tumble, or force heat dry.