Safety Instructions

8
Interval preset program
The Interval program allows for a cycle to turn on and then off in a sequential selected
amount of time.
• A directional massage is applied with a sequential cycle, and alternates between intervals of
being under treatment (Time On) and no treatment (Time Off).
• Start by selecting the Time On (in minutes), the Time Off (in minutes), and the total Interval
program time (in hours).
• The treatment begins with the selected Time On, and after this treatment is completed, the
pump pauses for the selected amount of Time Off, and then back to the selected Time On.
• This Time On/Time Off interval continues automatically until the total treatment time is
completed (up to 8 hours).
Total Time
Time On Time Off Time On
Sequential Cycle
Treatment
Sequential Cycle
Treatment
No Treatment . . .
Time On Time O Total (hrs)
10 — 90 min
(5min per step)
10 — 90 min
(5min per step)
1 — 8 hours
(1hr per step)
Figure 1 - Sequential Cycle Mode